Often it is simply to push and hold down the manual button for 5 sec or longer. The METHOD of switching is what you need. MANY such systems default to using the manual button for control, but allow you to switch to let the mobo signal take over. With Mystic Light Sync compatible products, you can build the all around RGB PC and add some glowing vibes to your whole gaming setup. Go back to your case installation / user instructions about this Hub. MSI Mystic Light provides you complete control of RGB lighting of your PC in one software, including your RGB motherboard / graphics card and PC case lighting. The other pair goes to the mobo JRAINBOW header, and that is so that header (and the utility supplied with your MSI mobo) can control the display INSTEAD of the manual button. It should be plugged into a SATA power output connector from the PSU to provide power for all the fan lights. The BOTTOM connector has two 2-wire connections, and you say one pair goes to a SATA power connector that you say is NOT connected to anything. The TOP 2-pin connector and cable go to the LED control switch supplied with the case, and that's how you can change the displays manually. Then what I expect is happening is that the Hub is a LIGHTING Hub only (does not do any fan speed control). Let's assume your description is all correct.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |